Tap and WellTreasure Valley water, from the public record

Belle Aire Acres 2 water quality

Met every federal limit. 2 contaminants at half a limit or higher. hardness not in the latest CCR.

ID3140009. Data through 2026-02-23. DEQ record.

What's in it

5.60ppm of 10.00ppm federal limit

EPA: infants below the age of six months who drink water containing nitrate in excess of the MCL could become seriously ill and, if untreated, may die.

Aquasana OptimH2O Reverse Osmosis + Claryum is certified to reduce it.

2.2ppt of 10.0ppt federal limit

Aquasana OptimH2O Reverse Osmosis + Claryum: manufacturer-reported, not certified.

7 other contaminants tested, not detected or well below the limit

Copper 0.10ppm Fluoride 0.11ppm Gross Alpha 13.3pCi/L Lead 1.0ppb PFHxS ND Radium 226 + 228 ND Uranium 13.0ppb

Filters that match

Start with this

Aquasana OptimH2O Reverse Osmosis + Claryum

under sink ro · diy

  • HFPO-DA (GenX)removes it, per manufacturer testing
  • Nitrate (as N)removes it, NSF or WQA certified
Whole house

Nothing in this water calls for whole-house treatment. A drinking-water filter covers the exposure that matters. Whole-house units here are optional, mainly for taste and chlorine.

Detections ranked by share of the limitevery Tier 1 detection, highest first
5.60ppm of 10.00ppm
56%
Elevated
13.0ppb of 30.0ppb
43%
Detected avg
3.69pCi/L of 15.0pCi/L
lab result 13.3pCi/L, uranium-adjusted
25%
Detected avg
2.2ppt of 10.0ppt
lab result 2.3ppt
22%
Elevated avg
Copper 90th pct
0.10ppm of 1.30ppm
8%
Detected 90th pct
Lead 90th pct
1.0ppb of 15.0ppb
7%
Detected 90th pct
0.11ppm of 4.00ppm
3%
Detected avg

Bar length is the highest result in the last 36 months as a share of the federal limit (MCL, or action level for lead and copper). The dark tick marks the limit. Gross alpha is compared after subtracting uranium, as DEQ does for compliance.

Full contaminants reporthighest, latest, limit, trend, last sample
ContaminantHighest, 36 moFederal limitShare of limitStatusTrendLast sample
Copper
90th percentile at home taps
note
0.10ppm1.30ppm AL8%Detected2025-12-31
Fluoride0.11ppm4.00ppm MCL3%Detected2025-09-23
Gross Alphanote13.3pCi/L
latest 11.5pCi/L
15.0pCi/L MCL25%Detected2025-09-23
HFPO-DA (GenX)2.3ppt10.0ppt MCL22%Elevated2026-02-23
Lead
90th percentile at home taps
note
1.0ppb15.0ppb AL7%Detected2025-12-31
Nitrate (as N)5.60ppm
latest 5.50ppm
10.00ppm MCL56%Elevated2026-02-23
PFHxSND10.0ppt MCLNDNot detected2026-02-23
Radium 226 + 228ND5.00pCi/L MCLNDNot detected2025-09-23
Uranium13.0ppb30.0ppb MCL43%Detected2025-09-23
  • Copper: 90th percentile of samples taken at customer taps. Results depend on the home's plumbing.
  • Gross Alpha: Compliance uses the running average of gross alpha minus uranium. Shown value is the highest lab result; the adjusted average is 3.69 pCi/L after subtracting 8.71 pCi/L for uranium.
  • Lead: 90th percentile of samples taken at customer taps. Results depend on the home's plumbing.

ppb = parts per billion (µg/L), ppm = parts per million (mg/L), ppt = parts per trillion. ND = not detected above the lab's reporting limit. MCL = federal maximum contaminant level; AL = action level for lead and copper (90th percentile of home taps); aesthetic = secondary standard for taste, odor or staining, not health. Bars show the highest result in 36 months as a share of the limit.

1 other regulated contaminants tested
Contaminant36 mo maxLimitStatusLast sample
Sodium57.30ppmnoneDetected2025-09-23

Hardness

Hardness is not reported in the latest CCR. Hardness not reported for this system; softener sizing uses a regional default of 11.7 gpg until a CCR value is reviewed.

Track record10 violations on record, 0 health-based
2017
1 2018
3 2019
2 2020
1 2021
2022
2023
2024
2025
2026

no violation recorded n monitoring or reporting only n includes a health-based violation ? outside the loaded record

No health-based violations (MCL, treatment technique, or disinfectant level) in the last ten years.

Monitoring and reporting violations (10)

A required sample or report was late or missing. These do not mean a contaminant was found, but a system that skips monitoring has gaps in its record.

YearRuleCountDetail
2021Revised Total Coliform Rule1Monitoring, routine (RTCR)
2020Revised Total Coliform Rule2Monitoring, routine (RTCR)
2019Revised Total Coliform Rule1Monitoring, routine (RTCR)
2019Lead and Copper Rule2 (1 open)Follow-up or routine tap sampling (LCR); Lead service line replacement (LCR)
2018Revised Total Coliform Rule1Monitoring, routine (RTCR)
2016Total Coliform Rule1Monitoring, routine major (TCR) · Total Coliform
2016Revised Total Coliform Rule1Monitoring, routine (RTCR)
2016Lead and Copper Rule1 (1 open)Lead service line replacement (LCR)
Lead and copper at the tap90th percentile of sampled homes against the action level
Lead at customer taps
1.0ppb 90th percentile · action level 15.0ppb
7%
Detected 5 homes sampled, 2023-01-01 to 2025-12-31

90th percentile of samples taken at customer taps. Results depend on the home's plumbing. Results are from sampled homes in this system, not from your tap. Home plumbing can add lead and copper. First-draw samples run higher than flushed ones.

Copper at customer taps
0.10ppm 90th percentile · action level 1.30ppm
8%
Detected 5 homes sampled, 2023-01-01 to 2025-12-31

90th percentile of samples taken at customer taps. Results depend on the home's plumbing. Results are from sampled homes in this system, not from your tap. Home plumbing can add lead and copper. First-draw samples run higher than flushed ones.

Where the water comes from2 active wells

2 active wells, and 0 treatment points on record (SDWIS counts each chlorination or filtration point as a treatment plant).

WELL #1-BELLE AIRE DR: Susceptibility: ioc moderate, voc moderate, soc moderate, microbial moderate.

Source water assessment susceptibility: final map[IOC:Moderate Microbials:Moderate SOC:Moderate VOC:Moderate]; hydrologic sensitivity H; pci land use map[IOC:M Microbials:M SOC:M VOC:M]; system construction M;

Source names (2)

WELL #1-BELLE AIRE DR, WELL #2-VENTURA

Every match, by categorytop three per category

We may earn a commission if you buy through these links. Rankings come from the matching engine (certification + flagged contaminants + annual cost), not from who pays more. How we earn money. As an Amazon Associate we earn from qualifying purchases. Prices are not shown; Amazon sets them on its site.

Drinking water

Under sink, pitcher, or faucet. Treats the water you drink and cook with.

Ranked first for this water under sink ro · DIY

Aquasana OptimH2O Reverse Osmosis + Claryum

Certified for nitrate, fluoride, and lead (NSF/ANSI 58); manufacturer-reported for HFPO-DA, uranium, and gross alpha.

Plumber recommended if you are not comfortable with a drain saddle and a tank. Not a whole-house solution.

Certified forNitrate (as N), Fluoride, Lead
Manufacturer-reported, not certifiedUranium, HFPO-DA (GenX), Gross Alpha
Also fits under sink ro · DIY

APEC ROES-50 Essence 5-Stage Reverse Osmosis

Manufacturer-reported reduction for nitrate, HFPO-DA, and uranium. Not NSF-certified for nitrate, HFPO-DA, and uranium.

Plumber recommended if you are not comfortable with a drain saddle and a tank. Not a whole-house solution.

Manufacturer-reported, not certifiedUranium, Nitrate (as N), Fluoride, HFPO-DA (GenX) and 3 more
Also fits under sink ro · DIY

iSpring RCC7AK 6-Stage Alkaline Reverse Osmosis

Manufacturer-reported reduction for nitrate, HFPO-DA, and uranium. Not NSF-certified for nitrate, HFPO-DA, and uranium.

Plumber recommended if you are not comfortable with a drain saddle and a tank. Not a whole-house solution.

Manufacturer-reported, not certifiedUranium, Nitrate (as N), Fluoride, HFPO-DA (GenX) and 2 more

Whole house

Installed where water enters the house. For fixtures, laundry and showers.

Nothing in this water calls for whole-house treatment. A drinking-water filter covers the exposure that matters. Whole-house units here are optional, mainly for taste and chlorine.

Softener or conditioner

Worth it at 7 grains per gallon or more.

Questions about Belle Aire Acres 2

Is Belle Aire Acres 2 tap water safe to drink?

Belle Aire Acres 2 met every federal limit in the last 36 months, with no open health-based violation. 2 contaminants were at half the limit or higher: HFPO-DA (GenX) and Nitrate (as N). The results table shows each value against its limit. Results reflect the system's sampling points, not the plumbing in any one home.

Is Belle Aire Acres 2 water hard?

Hardness has not been reported for Belle Aire Acres 2 in a reviewed Consumer Confidence Report yet. The softener sizing widget uses a labelled county default until a report is reviewed.

Is Belle Aire Acres 2 water fluoridated?

Fluoride was measured at up to 0.11 mg/L, below the 0.7 mg/L level used for community fluoridation, so it is naturally occurring rather than added. The federal limit (MCL) is 4 mg/L.

Where does Belle Aire Acres 2 water come from?

Belle Aire Acres 2 draws from 2 active wells. Source and treatment details are listed above.

What filter fits Belle Aire Acres 2 water?

For drinking water the matching engine ranks Aquasana OptimH2O Reverse Osmosis + Claryum first for this profile, based on certified reduction claims for the contaminants flagged above. See the filters section for the reasoning and alternatives.

Who to call

  • System contact: RAMAGE, JEFF, 208-250-8484
  • DEQ Boise Regional Office, 1445 N Orchard St, Boise ID 83706, (208) 373-0550
  • Southwest District Health (well testing, septic, local health questions)

Sources

Sample results as of 2026-02-23; inventory and violations from EPA SDWIS; page built 2026-09-14. 32 individual results reviewed.

More: Canyon County, Nitrate (as N), HFPO-DA (GenX)

Numbers are the system's samples at its taps and wells, not yours. Lead and copper are 90th percentiles from sampled homes. Well pages are nearby-sample estimates. Health text restates EPA and DEQ. Methodology.